Biking To Work

Posted on Apr 21, 2015 in Career, Travel

It’s Bike Month Challenge again soon, and while I’ll be missing the first couple of days of biking in May, I’m excited about my summer commute, even though it’s gotten quite a bit longer with our office moving into Seattle’s Pioneer Square District.
My new commute is a bit over 12km (7.6 miles) and shows the gritty side of Seattle, even though it starts in middle-class Ballard. From there, I am crossing Lake Washington Ship Canal via busy Ballard Bridge and pass by the industrial Balmer Rail Yard. I am then entering may favorite part, Elliot Bay Trail, which takes me along Seattle’s waterfront and past Olympic Sculpture Park into the gigantic construction site, that is the Pioneer Square District.
Check out the above hyperlapse and compare this to my commute through Taipei’s northernmost district Beitou 12 years ago

I am working on… the best “project” of my life!

Posted on Oct 24, 2013 in Career, Working on

131024 Maxi
After my sabbaticals in China in 2005 and India in 2011, I have this week started an entirely different kind of extended leave of absence: My son Maximilian was born a few months ago and now that my wife’s parents have left town after helping us through the first tough weeks, I am beginning my 12-week-long parental leave…

While it in fact feels a bit more like a parental stay, I am enjoying it tremendously and am grateful for the fact that this is part of Artefact’s benefits package… thank you Rob and Gavin for making this possible!

Want to work in the U.S.?

Posted on Mar 12, 2013 in Career


Before you continue down this page, dear reader, I would like to point you to this website’s disclaimer page, and highlight the fact that the following is by no means a replacement for legal advise. Please be mindful that I am but a mere layman of the subject matter that I am discussing here and that the following is only a personal account of my experience immigrating into the United States…

After working in this country for almost five years on an H-1B visa, I have now acquired a Green Card last year. Woot Woot!

Since I am often approached by foreign designers, and sometimes share the story of my immigration with them, I thought it was time to recapitulate the legal process I went through here on this site.
If you are looking to work in the U.S. as a foreign national and don’t have an existing work visa or a green card, there are several ways to acquire a work visa for you. As far as I know, the most common one – which happens to be the route that I took – is the H1B visa. You have to find a prospective employer that is willing to sponsor this process: Beyond the single fact that they offer you a job, they will most likely also help you by providing the services of an immigration attorney, and support the case financially by paying the appropriate visa application fees… in my case, Carbon Design happened to be the sponsor for the H1B visa.

My current employer Artefact has also done this for several designers and I know of other firms – both smaller design offices and larger corporations – that have gone through this process for foreign employees.

There are a few catches, though with the H1B visa application process:
1. Applications can be filed, beginning on April 1st of each year.
2. The U.S. government approves a maximum of 65,000 H1B visas awarded per year. Once this H1B visa cap is reached, no new applications can be filed during that particular year.
3. Visa applications are usually approved after 4-6 months.

In my case, the visa cap for the fiscal year 2008 was reached on the first day of the application process, April 1, 2007. In fact, over 150,000 H1B applications had been filed by midday and a lottery was used to determine whether or not I could work in the U.S. While the H1B visa cap reach date varied greatly over the past decade, to be on the safe side, you should consider to applying early.

My visa had been granted in September of 2007 and I began work in the States on January 3rd of the following year. For this year, a company that is interested in hiring you, can begin the application process in April, and you could only begin to work in the U.S. at some point between August to October. The H1B visa is valid for an initial three years, and extendable to six. After that period is over, you would have to apply for a Green Card if you wanted to continue to work stateside…

Postindustrialdesign

Of matchbox cars, wooden toy blocks, and a guiding light for a career

When I was a kid, like most boys, I loved to play with matchbox cars. Unlike most boys, I was not satisfied to simply caper about with the cars; instead I wanted to create roads, and cities, and worlds around them.
Building these worlds out of the square wooden toy blocks that my grandfather – a former carpenter – had made for me, I essentially gave myself “frameworks” to play within.

130103 PID1The only two remaining toy blocks from my childhood*.

Unsurprisingly, when I started out as a designer, I was similarly looking to employ a framing structure around my career. Don’t get me wrong, I focused on the essentials of my job, my clients, and the exciting projects I was working on, but at the same time I was looking to identify how the design profession would develop in order to define and hone a vision for my career.

The many metamorphoses of design

There are some constants to the design profession – think: problem solving, prototyping or aesthetic sensibilities. Yet, the skills to create technical drawings for example, that I acquired in university were obsolete by the time I started my first job and terms like “user experience”, or “design thinking” did not play a major role until a few years into my career: The design craft has always been in a state of flux and will likely continue on this trajectory.
While both the “why” behind the profession and pragmatic definitions of the trade, have become table stakes for the designer these days, I have come to believe that four aspects will be of great importance for the design profession in the future.

130103 PIDCapacity – Responsibility – Process – Content: The four aspects of Postindustrialdesign (PID)

And as I was pondering, reading, and writing, about these facets, I started seeing my work as postindustrialdesign**, an expression that had been defined some 30-odd years ago, and that is yet as contemporary and aspirational today as it was in the 1980s.

“The coming of post-industrial design”

The term was first coined by Nigel Cross in his paper on the progress of design methods. In it, Cross suggests a future for the development of design methods, that is informed by the concept of post-industrialism, and that will see design develop its own methods, rather than refining processes that had been borrowed from the field of science at the beginning of the 20th Century.
Cross argues that in a post-industrial society, production of goods is resource-conserving and quality-focused, he believes that design tools will be superior, yet simpler, and cheaper than its predecessors, and that the use of such tools will allow for new processes to emerge.

“My brand” of Postindustrialdesign

Cross’s theories resonate with me and I find his foresight astonishing: eco-friendly industrial design has still not been fully embraced, tools like computers, software, or 3D printers, have become accessible to everyone and the ‘maker culture’ does indeed have an impact on the product development process and the role of the designer in it.
In the future, Postindustrialdesign will see Cross’s framework extended from “product–tools–process” into the one that I mentioned earlier. So here goes:

Capacity

Nigel Cross put forth an accurate vision about the forthcoming era of industrial design. In the 30 years that have passed since publishing his paper, the profession would be democratized through tools that were cheaper and freer than the ones previously used; mostly due to the development of targeted software.
The role of the designer is largely dependent on his tools, and these tools are not only growing in number, and complexity, but do also impact both process and outcome of our work.

130714 iPhone Holder 8 PrintingNot unexpectedly rapid prototyping is one of the postindustrialdesigner’s newer capacities. More and more of his tools will be borrowed from neighboring fields such as business and science.

Given our trajectory in this regard it is to be expected that the postindustrialdesigner’s toolkit will include not only sophisticated software, but also an ever-growing set of prototyping methods, among them such techniques as 3D printing, laser cutting, and CNC machining.
The postindustrialdesigner will be able to use these tools not only to improve on the design process, but they will also be able to transpose the utilization of such tools to their final output – in the case of rapid prototyping, this could mean that postindustrial products are also “rapidly manufactured”.

Process

While large producers of goods will still dominate the marketplace in the foreseeable future, the aforementioned tools like crowd-funding will allow for small organizations to develop specialized products on a smaller scale, essentially dismembering large bureaucratic structures in some cases.
On a parallel path to the traditional product development process, an adaptable design process will ripen within these smaller entities. This new process will go from being autocratic to being democratic, from exclusive to inclusive and from rigid to to more flexible.
In his 2005 I.D. Magazine article “A Manifesto for Postindustrial Design”, Jamer Hunt draws inspiration from the open-source mode of software creation and wants to transfer the process to the development of physical products. In the eight years since, open source product development efforts from the likes of Bug Labs and crowd-funding websites such as kickstarter.com or indiegogo.com have proven that there is both the need and the space for such a parallel path to product design.

130103 LunatikWhat used to happen behind closed doors is taken out into the open by the postindustrialdesigner: Scott Wilson shares the prototyping process of LunaTik on Kickstarter.

While I do not anticipate a new product development process to replace the traditional methods overnight, the postindustrialdesigner will leave the romantic “genius-in-a-tower” image behind at times and will go from being creative to being collaborative and from being professional to being participatory, in order to meet new needs.
The postindustrialdesigner won’t think of the two processes as mutually exclusive: he might jump between them or even imagine a design-led and “crowd-funded” product development effort within the confines of a larger organization.

Content

Both Berg’s Jack Schulze and Kicker’s Dan Saffer in their respective blog posts “The Ghost in the Field” and “Post-Industrial Design” write about the designer’s new raw materials:

Where once industrial design was concerned with radii, form, and finish, we now deal in behaviours, experience, shifting context, and time.
– Jack Schulze

More than anything, it seems that post-industrial design is both a way of working and a way of thinking about products. It’s a way of working in that it considers the interactive behavior a product should engender before considering its physical form.
– Dan Saffer

Panasonic FlightPath 1While user interface design is not part of the industrial designer’s vocabulary, the postindustrialdesigner is well-versed in this domain.

While I challenge Saffer regarding his assessment that postindustrialdesign sure has “arrived by now”, I cannot but agree with Schulze’s and Saffer’s assertion that the interactive behavior of an object must be an integral part of modern day design.
Beyond that, the postindustrialdesigner will also be involved in the creation of business and design strategies, and the services that frame the physical product and its interaction.

Responsibility

In terms of the designer’s responsibility in the product development process, Cross’s paper is mainly concerned with the scarcity of resources in a post-industrial society. He argues that products move from specialized to generalized, from mass-produced to short-run, and from short-lived to long-lived, all with a focus on quality, so as to conserve resources.

111108-7The postindustrialdesigner’s most lofty goal: saving the world.

And while this ideal certainly makes even more sense now than it did 30 years ago, there are also political, and sociological aspects that need to be considered. With the content of his work shifting from the mere creation of physical objects to the design of related interactions, strategies, and services, the postindustrialdesigner is concerned with the shaping of behavior for a preferable future – read more on this topic of “21st Century Design” on artefactgroup.com.

So, what does this all mean?

Being a postindustrialdesigner, I am using the above framework not only to make career decisions, but also to inspire and to guide my day-to-day work.
The beauty of those square wooden toy blocks my grandfather gave me as a kid was that they could always be rearranged, and that I could add and subtract bricks as I desired.

130103 PID2

So, along the way – as my thoughts and opinions become more refined – I reserve the right to adapt my framework to new developments in industry and society and who knows, one day I might migrate this entire website to its new domain postpostindustrialdesigner.com.

 

* After we stopped playing with them, my grandpa used the wooden blocks for some of his tinkering and home improvement projects, thus there are now some drill holes and notes on them…
** Yes, I do spell that as one word.

In the Artefact Studio Space

Posted on Jan 23, 2012 in Career
  • 120123-1
  • 120123-2
  • 120123-3
  • 120123-4
  • 120123-5
  • 120123-6
  • 120123-7
  • 120123-8
  • 120123-9

I took a few shots in the office in recent months* and thought I’d post them here… enjoy!

* The team photo was taken by Tucker

India

Posted on Nov 8, 2011 in Career, Travel

For the second time in my career, I am taking a two-month sabbatical, this time in India, where my wife Evelyn has been working since January for the organization NEEDS in Deoghar.

This is my third trip to India, with the first one being the archetypical tourist-trip from Delhi, via Agra through the state of Rajasthan and its famous cities. I also visited the country a few months ago this spring – also to visit Evelyn.

This time around, I spent a few days in Kolkata during Durga Puja, before staying two weeks in Deoghar to experience life in Northeastern India. Originally, I planned to conduct a design project there, but found that the time was just too short to do something truly meaningful, so that I ended up “designing my time in Deoghar” and spending it on some  personal projects and helping out with smaller aspects of NEEDS’ work and in their education program.

Evelyn and I finished off the trip with a little holiday in the opposite corner of the most colorful country of the world and traveled through the Southwestern state of Kerala, where we visited the coastal towns of Varkala, Kollam, Alleppey, and Cochin and the Periyar Wildlife Reservoir upcountry.

Hello Artefact!

Posted on Jul 26, 2010 in Career


I have been partnering with Artefact in my capacity as a lead designer with Carbon Design on about half a dozen  projects over the past two years, and today I am starting to work here full time!

Together with three former colleagues from Carbon we are beginning to build the industrial design discipline at Artefact. The transition should be easy for me and the team and we are all looking forward to the ride!

Goodbye Carbon

Posted on Jul 2, 2010 in Career


After two and a half years, I have decided to leave Carbon Design and – together with Fernd van Engelen, Johanna Schoemaker, and Jonas Buck – join Artefact in Seattle.

Carbon Design is a great place to work and I will miss my former colleagues that have became friends over the past few years and helped me much with my first steps in the States… thank you for all the support, guys – I will stay in touch!

In the Studio at Carbon

Posted on Feb 8, 2008 in Career

A few brief impressions from the office…

Hello Seattle, hello Carbon Design!

Posted on Jan 4, 2008 in Career


I have arrived in Seattle!

I didn’t have the chance to see much or to say ‘hello’ to my new environment in any way, but am happy and excited that I have finally turned the page to this new chapter of my life after planning it for about one year now… it feels great!

While I officially will be starting next week, I wanted to say hi to my new colleagues at Carbon Design because I will be flying out to visit CES in Las Vegas on Monday. So I went to the office today: It’s located in Bothell, north of Lake Washington in a building that formerly served as a bank – our meeting room is inside the safe and I was told, that we’d be locked in there for meetings until all meeting goals are achieved…

Well… the atmosphere on my first day was relaxed and I received a very friendly and warm welcome – feels good to have a job again after my two month break and I cannot wait to get my hands on some new projects!